Don't Do It Yourself

How to Sell Manufacturing Data to AI

A manufacturer sells its data to AI by licensing shop-floor records to a buyer like Mercor. That means CAM programs, work orders, inspection reports, alarm logs and process data.

Mercor pays manufacturing and industrial companies $100,000 to $1.5 million. That’s the highest top end of its 24 industry listings.

The risk is different from a law or accounting firm’s. It’s less about personal information and more about customer contracts, export controls and your own trade secrets.

For the full process across every industry, start with our guide to how to sell your company’s data to AI companies.

Key takeaways

  • Mercor’s manufacturing listing pays $100,000 to $1.5 million and wants several years of work orders from companies with 20 to 2,000 employees.
  • Data restricted by customer contracts is out. Mercor lists it as “not a fit.”
  • Drawings, photos and instructions for making defense articles are ITAR technical data. Showing them to a foreign person, even inside the US, counts as an export.
  • Defense subcontractors holding controlled unclassified information are bound by DFARS 252.204-7012, which flows down to commercial suppliers.
  • A trade secret only stays one if you take reasonable measures to keep it secret, so the license terms matter.

What manufacturing data do AI companies buy?

AI companies buy production and maintenance records that tie a process to a measured result: CAM programs with setup sheets, work orders with inspection reports, and machine alarm logs with process data. Asset photos, drone surveys and scans linked to work orders are especially valuable.

Mercor’s manufacturing and industrial listing, read October 30, 2026, splits it up like this:

Data Mercor’s view Main risk
CAM programs and setup sheets Core of the license Customer IP and export controls
Work orders and inspection reports Core of the license Customer names and part numbers
Alarm logs and process data Core of the license Your own process trade secrets
Asset photos, drone imagery, scans Core, and adds to what you earn People and customer parts in frame
Annotated CAM programs and G-code Adds to what you earn Customer IP and export controls
Quality and SPC data Adds to what you earn Customer quality agreements
ERP and MES records Adds to what you earn Pricing, customers, employee names
Checklists and correction letters Adds to what you earn Low, if they hold no customer details

Mercor names the kinds of companies it wants: CNC job shops, contract manufacturers, foundries, utilities and energy operators, and test labs.

It needs records the company owns and several years of history. Marketing material on its own isn’t a fit.

Two other Mercor listings overlap. Hardware engineering companies earn $45,000 to $1.3 million for CAD assemblies, circuit designs and test results. Semiconductor and materials companies earn $100,000 to $750,000 for run records.

How much is manufacturing data worth to AI companies?

Mercor’s manufacturing listing pays $100,000 to $1.5 million, and says the figure depends on record types and history. Its $1.5 million top end is the highest of Mercor’s 24 industry listings, and its $100,000 floor is among the highest too.

Only consulting ($150,000) and construction ($115,000) start higher than manufacturing on Mercor’s table. Hardware engineering ($1.3 million) and law firms ($1.2 million) have the next-highest ceilings.

Records that link a program or work order to a measured result push a deal toward the top.

A CAM program alone is worth less than the same program with its setup sheet, inspection report and photos of the finished part.

Polyshares publishes its deal sizes too. Its track record page lists a $275,000 perpetual exclusive license from a solar company.

Mercor also shows a $110,000 referral fee for manufacturers. That’s paid to someone who refers a company, not to the company.

Our guide to how much company data is worth to AI compares published payouts across industries.

Do customer contracts stop you from selling manufacturing data?

They can. Mercor rules out “data restricted by customer contracts,” and asks every manufacturer whether any customer contract restricts its data. Contract manufacturers and job shops are most exposed, because their CAM programs and inspection reports are built from customers’ drawings.

Read four places before you list a job:

  • The customer’s NDA
  • The terms and conditions on each purchase order
  • Any supply or quality agreement
  • The legends on the customer’s drawings

Look for clauses that limit use of the customer’s information to making their parts, or that give the customer ownership of tooling and programs.

Your own products are a different case. If you designed the part and own the drawings, the contract question mostly goes away, and the export and trade secret questions are what’s left.

When in doubt, leave the job out. Plenty of shops have years of maintenance records, alarm logs and in-house work that never touched a customer’s IP.

What about export-controlled or defense work?

Leave it out unless your export compliance lead clears it. Under ITAR, drawings, photos and instructions needed to make a defense article are technical data, and releasing them to a foreign person inside the US is an export. Defense subcontractors with controlled unclassified information also have DFARS security rules.

22 CFR 120.33 defines technical data as information “required for the design, development, production, manufacture, assembly, operation, repair, testing, maintenance, or modification of defense articles,” including blueprints, drawings and photographs.

22 CFR 120.50 counts releasing that data to a foreign person in the US as a “deemed export.” So does letting them view it.

Security teams hit the same rule through the EAR’s intrusion-software entries, covered in our guide to selling cybersecurity data to AI.

Commercial items have a parallel rule. Under the Export Administration Regulations, 15 CFR 734.13 treats releasing controlled technology or source code to a foreign person in the US as a deemed export.

Most commercial shop data needs no license. Jobs for parts with a controlled classification on the Commerce Control List can, so check the classification first.

Defense suppliers have one more layer. DFARS 252.204-7012 requires NIST SP 800-171 security for covered defense information, and the prime has to flow it down to subcontractors, including commercial ones.

Ask any buyer, in writing, whether a foreign person will see the data, including offshore annotators or contractors. If the answer is yes or “we don’t know,” controlled jobs stay out.

Does selling process data give away your trade secrets?

It can. Federal law only protects a trade secret if the owner “has taken reasonable measures to keep such information secret.” Licensing a process to an AI buyer under tight confidentiality terms can keep that protection, but a model trained on your recipes may still help a competitor.

That test comes from the Defend Trade Secrets Act definition at 18 U.S.C. 1839(3). A license with no confidentiality clause works against you if you ever have to prove the secret was protected.

Sort your data before you scope a deal:

  • Keep out: the process windows, recipes and fixturing tricks that win you jobs
  • Usually fine: maintenance work orders, alarm logs, generic setup sheets and inspection records for common parts
  • Decide case by case: SPC data and annotated programs for your best-margin work

Put confidentiality, use limits and a ban on resale in the license. Our AI data licensing agreement checklist lists the clauses to check, including exclusivity.

Which systems does manufacturing data come out of?

Manufacturing data for AI usually comes from four kinds of system: CAM software for programs and setup sheets, maintenance software for work orders, MES and ERP for production records, and a process historian for alarm logs and sensor data. Mercor’s listing names tools from all four.
System Tools Mercor names What it holds
CAM Mastercam, Fusion CAM, Esprit Toolpaths, G-code, setup sheets
Maintenance (CMMS) Maximo, Fiix, UpKeep Work orders, asset history, photos
MES and ERP MES Production runs, routings, quality records
Process historian OSIsoft PI Alarm logs, sensor and process data

The most valuable exports join these together. A work order that links to the program that ran, the alarms during the run and the inspection result is worth more than any one of them alone.

Check how far back each system goes before you apply. Mercor asks which system holds your records “and for how many years?”

What personal information is in shop-floor data?

Less than in most industries, but some. Work orders and MES records carry technician and operator names and badge IDs, photos and drone footage can show people’s faces, and ERP exports hold customer contacts and pricing. Strip or replace them before delivery.

Replace names with consistent codes so the buyer can still see that one technician did a run of jobs. Blur faces in photos, and drop any images of a customer’s part you don’t have rights to.

Mercor says it removes or protects personal information during export. Someone at the plant should still check a sample.

Our guide to anonymizing data for AI training covers the tools, including ExifTool for stripping photo metadata.

Who buys manufacturing data for AI?

Mercor has the only published listing for manufacturers, paying $100,000 to $1.5 million. micro1 buys operations data such as SOPs, inventory and fulfillment workflows from companies with 30 or more staff. Polyshares buys a company’s operational record outright, with no headcount minimum.
  • Mercor: production, maintenance and inspection records, for companies with 20 to 2,000 employees anywhere.
  • micro1: operations and logistics data, listed on its data partnerships page, for companies with 30 or more full-time staff. You can apply to micro1 here.
  • Polyshares: perpetual exclusive licenses to a company’s operational record, anonymized before delivery.

Our list of companies that buy business data for AI has each buyer’s terms.

Contractors face many of the same questions about drawings and owner contracts. Our post on selling construction company data to AI covers them.

What are the steps for a manufacturer, start to finish?

A manufacturer licenses its data in eight steps: list the systems and years of history, flag customer-owned jobs, flag export-controlled and defense work, set aside trade secrets, apply to a buyer, have counsel review the license, check a sample of the export, then deliver and get paid.
  1. List your systems. Note the CAM, maintenance, MES and historian tools you use, and how many years each holds.
  2. Flag customer-owned jobs. Read NDAs, PO terms and drawing legends, and drop any job they restrict.
  3. Flag controlled work. Pull ITAR, EAR-controlled and DFARS jobs out of scope unless your export lead clears them.
  4. Set aside trade secrets. Decide which process data stays in-house.
  5. Apply to a buyer. Mercor’s manufacturing listing scopes the data on a call.
  6. Have counsel review the license. Check confidentiality, use limits, exclusivity and who can see the data.
  7. Check a sample of the export. Look for customer names, part numbers, faces and controlled drawings.
  8. Deliver and get paid. Mercor says payment typically lands two to four weeks after signing.

Start with maintenance records. They’re usually yours outright, they go back years, and they rarely touch customer IP.

If you design products rather than make them, our guide to selling hardware engineering data to AI covers CAD assemblies and circuit designs.

Common mistakes when selling manufacturing data to AI

The most common mistake is assuming that because the data sits on your servers, you own it. These are the others:

  • Licensing CAM programs built from a customer’s drawings without reading the PO terms
  • Treating a US-based buyer as safe for ITAR data without asking who will see it
  • Leaving customer names and part numbers in work orders and inspection reports
  • Sending your best process recipes along with routine maintenance logs
  • Signing a license with no confidentiality clause, which weakens trade secret protection
  • Reading Mercor’s $110,000 referral fee as what the company gets paid

Frequently asked questions

Can a manufacturer sell its data to AI companies?

Yes, if it owns the data and no customer contract, export control or defense rule restricts it. Mercor’s manufacturing listing rules out data restricted by customer contracts.

How much do AI companies pay for manufacturing data?

Mercor’s manufacturing and industrial listing pays $100,000 to $1.5 million, depending on record types and history. That’s the highest top end of its 24 industry listings.

What manufacturing data do AI companies want?

CAM programs with setup sheets, work orders with inspection reports, machine alarm logs and process data, plus asset photos and drone imagery linked to work orders.

Can you sell ITAR-controlled data to an AI company?

Not without export authorization if a foreign person could see it. Under 22 CFR 120.50, releasing ITAR technical data to a foreign person in the US is a deemed export.

Does licensing data to AI give away trade secrets?

It can. Federal law only protects information whose owner takes reasonable measures to keep it secret, so license under strict confidentiality terms and keep your core process recipes out.

How many employees does a manufacturer need to sell data to Mercor?

Mercor’s manufacturing listing takes companies with 20 to 2,000 employees that have several years of work orders. micro1 wants 30 or more full-time staff.

Last updated: October 30, 2026

Disclosure: some links on this page are affiliate links. If you sign up through one, we earn a commission at no extra cost to you.

This isn’t legal advice. If you do defense or export-controlled work, have your export compliance lead or counsel review any data deal before you sign.

Don't Do It Yourself
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.